Coherer Polypropylene Capacitor
   CBB60
   CBB65A Run Capacitor
   CBB65A-1 Run Capacitor
   CBB65-R
   CBB65 Run Capacitor

Polypropylene Pellicle capacitor
   CBB61

Motor start capacitor
   CD60-B
   CD60-A
   ABS Starting capacitor

Special capacitor for Lighting metal halide lamp
   CBB65A-2
   CBB65A-3
   CBB65A-4 HID Lighting 110℃ Cap
   CBB65A-5 HID Lighting 110℃ Cap

Reticulate-MMP Capacitor

Capacitor Accessory

HZ-SPP Series
   Hard Start Capacitors

Power Faction Correction
   H55334 Three Phase
   H55324 Three Phase
   H55100 Single Phase

Microwave oven capacitor
   CB85 Capacitor

POWER SOLUTION SERIES
   Intelligent low voltage power capacitor
   Intelligent harmonic restraining low voltage
   580 combination type low voltage reactive
   Active Filter Module
   HZSPC unbalance automatic adjusting device
   Active power filter FCL / Static var generator FCL
   JKGHZ Intelligent combination low voltage reactive
   intelligent capacitance-status indicator
   JKW reactive power auto compensation controllers
   RPCF power auto compensation controller
   HZ111 environmental low voltage shunt capacitor
   BSMJ self-healing low voltage shunt capacitor
   HZFK series intelligent combination switch
   Three-phase series detuning reactor
   High voltage capacitor series

 
 
Power Faction Correction >> H55100 Single Phase >> HZK-T H55100  

Power Faction Correction

The self-healing PFC capacitor for low voltage application produced by Huizhong are using the PP film with special metallization of Zn/AL and self-made filling material for the impregnation.The capacitors are manufactured in accor-dance with standard of GB/T12747-2004 and IEC60831-1+/2,which are mainlyapplied in Low voltage foe increasing the power quality.The product performance has been inproved a lot these years with low loss,low heat dissipation,no leakage,long life and consistency in quality.through our research and experiment.

 

Power Capacitor Power Faction Correction

Power Capacitor (Polyproplene film capacitor)

Standard IEC60831-1/2,UL810

Product series

H55334 Three Phase

H55324 Three Phase

H55100 Single Phase

Features

Output Kvar

5Kvar-30Kvar

0.5Kvar-5Kvar

0.7Kvar-5Kvar

Rated frequecy

50/60Hz

50/60Hz

50/60Hz

Rated voltage

230Vac-525Vac

230Vac-525Vac

230Vac-525Vac

Capacitor tolerance

-5%/+10% other on request

-5%/+10% other on request

-5%/+10% other on request

Electrical test VTT

2.15 x VR during 2s

2.15 x VR during 2s

2.15 x VR during 2s

Insulation VTC

3000VAC/50Hz during 10s

3000VAC/50Hz during 10s

3000VAC/50Hz during 10s

*tan 6 (50Hz)

≤1.0x10-3

≤1.0x10-3

≤1.0x10-3

Protection degree

IP20

IP00(IP50 on request)

IP00(IP50 on request)

Max.permissible voltage Vmax

VR+10%(up to 8h daily)/VR + 15%( up to 30min daily)/ VR + 20%( up to 5min daily)/ VR+ 30%( up to 1min daily)

Max.permissible current Vmax

UP to 1.3·IR(A)(1.5·IR including combined effects of harmonice,over voltage and capacitance tolerance)

Surge current Is

UP to 200·IR(A)

Power dissipation*

≤0.2W/Kvar(dielectric) and ≤0.45 W/Kvar(total)

Temperature

-40/D.Max.55

Humidity

Av.rel.95%

Maximum altitude

4000m

Mean life expectancy

Up to100000 hours at temperature class -40/D

Switching

Max.5000 switchings per year acc.to IEC60831

Safety

Mechanical safety

Overpressure disconnector

Max.short cicuit current

AFC:10kA according UL810 standard

Discharge resistor

≤60s to 75V or less

Power Capacitor (Polyproplene film capacitor)

Standard IEC60831-1/2,UL810

Material

Aluminium can and top

Aluminium can and top

Aluminium can and top

Dimensions

Φ:76-96mm H:163-350mm

Φ:50,63.5mm H:148mm

Φ:63.5mm H62.5,75,100,125mm

Terminals

SIGUT terminal Max.Torque:2Nm
creepage distance:≥12.7mm
clearance: ≥9.6mm(UI810)

Max.cable cross section:25mm2
Max. Current:50A

#250 fast-on terminal 6.3x0.8

creepage distance:≥12.7mm
clearance: ≥9.6mm(UI810)

Max. Current:15A

#250 fast-on terminal 6.3x0.8

creepage distance:≥12.7mm
clearance: ≥9.6mm(UI810)

Max. Current:15A

Impregnation

Non PCB,resin filling: soft polyurethane resin

Fixing

Threaded bolt M12

Max.Torque(AI can stud)

10Nm

Approval

 

Third part test approval internal test approval

Standard terminals

 

Discharge resistor

 

Standard Monting

 

 


Click count:2975  【Return  
 
 
Home    |    About us    |    Products    |    News    |    Honor    |    Workshop    |    Contact    |    中文版
CopyRight © Zhejiang Huizhong Industry Co.Ltd. webmaster Domain&Hosting:MeetGoogle.com